OpenELEC provides builds for many different types of hardware. Please read below carefully to select the correct one. Builds are provided in two formats:

If you are new to OpenELEC, check out the installation guide on the Wiki.

Generic build is a "catch-all" build for x86 (Intel/AMD) CPU systems. OpenELEC 8.0 releases are available in 64-bit (x86_64) formats only.

Generic 64-bit Builds
[Stable] OpenELEC 8.0.4 (x86_64) Update file Disk image
[Legacy] OpenELEC 7.0.1 (x86_64) Update file Disk image

These builds are based on the AARCH64 architecture and run on the WeTek Play 2 system only. Please see our Wiki for special installation instructions.

To install on SD-Card you MUST update WeTek's Android software to the latest OTA version first

WeTek Play 2 AARCH64 Builds
[Stable] OpenELEC 8.0.4 (aarch64) Update file Disk image Android Recovery Install file

These builds are based on the AARCH64 architecture and run on the WeTek Hub system only. Please see our Wiki for special installation instructions.

To install on SD-Card you MUST update WeTek's Android software to the latest OTA version first

WeTek Hub AARCH64 Builds
[Stable] OpenELEC 8.0.4 (aarch64) Update file Disk image Android Recovery Install file

These builds are based on the ARM architecture and run on Raspberry Pi only. There are separate builds for first-generation (RPi) including Raspberry Pi Zero and Raspberry Pi Zero W and second-generation (RPi2, RPi3) boards. Please select the right one!

See our Wiki for special installation instructions.

Raspberry Pi First-Generation single-core models (Model A/B/B+/Zero(W) 256/512MB) ARM Builds
[Stable] OpenELEC 8.0.4 (arm) Update file Disk image
[Legacy] OpenELEC 7.0.1 (arm) Update file Disk image
Raspberry Pi2 and Raspberry Pi3 Second-Generation quad core models (Model B 1024MB) ARM Builds
[Stable] OpenELEC 8.0.4 (arm) Update file Disk image
[Legacy] OpenELEC 7.0.1 (arm) Update file Disk image

The Freescale iMX6 build is for systems with Freescale iMX6 CPUs only. Currently all Solid-Run Cubox-i, CuboxTV, Hummingboard and the OSMC Vero (the white Cubox-i2w) devices are supported.

Please see the Wiki for special installation instructions.

Freescale iMX6 ARM Builds
[Stable] OpenELEC 8.0.4 (arm) Update file Disk image
[Legacy] OpenELEC 7.0.1 (arm) Update file Disk image

Builds are status tagged as follows: